The main materials of Tapping tap

2025-09-01 15:31:01

Tapping tap will use their unique cutting effect to quickly and smoothly cut the highest level of threads for cutting through holes. Top Thread tapping is mainly used for cutting threads of various through-hole materials, and has the same straight grooves as general hand thread tapping.

But there is a specially designed spiral groove at the front end of its cutting part, which is used to rotate and push the cutting out from below the generator release paper hole. Because the tip wire tapping has the function of rotating and discharging chips, it can not only keep the groove clean to reduce the resistance during cutting, but also avoid damage to the wire tapping caused by cutting blockage. Therefore, the tip wire tapping can use a faster speed than ordinary manual wire tapping to cut high-precision threads.

When there is ample space in the inner bottom of the unperforated hole, an Squeezing tap bottom hole with a long length that can be eaten in or a front end silk tap can be used; Increase the size of the thread tap, which is used when necessary to make enlarged internal threads such as when cutting internal threads or before electroplating; Due to the premise of cutting, it is advisable to use wire taps that have undergone nitriding treatment when the material being cut is easily separated from the wire tap.