Advantages and disadvantages of tap specifications for Cobalt containing tap

2025-09-01 16:47:15

1. High processing efficiency

In large-scale thread machining, it is very difficult to improve machining efficiency due to the low cutting speed limit of Cobalt containing tap and the reverse tool retraction after machining the threads.

However, if we use a thread milling cutter, not only does it have a high milling speed, but its multi slot design also increases the number of cutting edges, making it easy to increase the feed rate, which can greatly improve machining efficiency.

In the machining of long threads, we can also use blades with longer cutting edges to reduce the axial feed distance (equivalent to shortening the thread) to further improve machining efficiency.

2. Excellent surface quality and dimensional accuracy

When machining with Tungsten steel tap, it is quite difficult to achieve good surface smoothness and thread accuracy due to the lower cutting speed and the impact of difficult chip breakage.

However, for thread milling, everything is not a problem. The high cutting speed and small cutting force make the cutting surface very smooth; Fine chips can be easily flushed out of the workpiece by the coolant without scratching the machined surface.

For workpieces with high requirements for thread accuracy, as thread milling cutters rely on spiral interpolation to ensure accuracy, simply adjusting the program can easily obtain the required high-precision threads. Drill bit tap This feature has an absolute advantage in precision thread machining.